ITEM SPECIFICATIONS

Function Settings

Light control + Time control

1. Light will turn on automatically in a dim mode at night, during daytime, light turn off and the system start to recharge by bright sunlight.

2. The lights can be set to turn on 3/5/8 hours per night through remote control. Installation Method 1. Choose the best position to install the lamp. 2. Fix the lamp on the wall with two expansion screw .

3. The light angle can be adjusted according to your need.

4. The light can not be installed in low-lying areas to avoidbeing immersed in water.

5. Connected the male head plug with female one and tighten the waterproof nut to finish the installation.

6. Turn on the switch button byremote control. Maintenance

1. The battery should be checked after long transportation, or when the solar lamp is not in use for a long time, please leaving the lamp under the sunlight for charging regularly.

2. Solar Panel should be installed in a well-lit area where it can receive maximum straight sunlight during daytime. Any cover that shades the Solar Panel will affect its ability to absorb sunlight and decrease the performance of device.

3. Keep the Solar Panel free of dirt, debris and snow. Clean the surface of the Solar Panel regularly with a soft slightly moistened cloth with soap and water or a dry brush only. Do not use any corrosive cleaning liquids or chemicals since this may damage the housing surface or impair future operation.

4. LED chip has a long lifespan. Regularly dirt cleaning of the whole light source is needed in case the dirt resists electricity and reduce the brightness of lights.

5. During the cloudy days,you can use the remote controller to control the light to save electrical energy and prolong the life time of the battery